Sump Pump Repair is an easy task to perform and is not complex. The average life of a sump pump is around 10 years, however, there are times when it might need some repairs as well. When it comes time to call a repairman, there are a few tips you can follow to make the job go smoothly and get the job done in record time. One thing that will help is if the sump pump has not been operating for a while, check all of the pipes that run to it. This could help to eliminate the potential of one of them having a leak and cause the sump pump to malfunction.
If you notice any cracks in the pipes, which have possibly gone untreated for quite a while, it may be time for some Sump Pump Repair. One of the reasons that this would happen is because the float inside the unit was not properly installed. There are different float sizes available for different sized sump pumps. If it was not installed properly the float may have no backstop, this will lead to the sump pump failing. Check and see that the float screw is adjusted correctly and tightly. Checking this screw each year will ensure that the float doesn’t break.
If after performing a complete inspection, the pipes and plumbing behind the pump still exist, then it is time to perform some Sump Pump Repair. If the water is not draining and leaking from the basement, then it could be due to a cracked pipe or clogged sink trap. There are some simple plumbing tools that can be used to remove the blockage. When performing this type of repair sump pump replacement is recommended.
Leakages in the pipes, plumbing fixtures, and fixtures around the outside of the home are another cause for concern. This includes kitchen sinks, hot water heating units, and washing machines. These plumbing fixtures should be checked on a regular basis for leaks or cracks in the pipework. If you have had any type of leak in your plumbing system you should consult with a licensed professional about some of the basic steps for sump pump maintenance. Leak checks and repairs should be done regularly throughout your home to prevent the unnecessary costs.
Sometimes the water level in the sump pit can become too low. This can often be an indicator of an impending flood. You should make sure that there is at least one inch of water in the pit. A check valve, water stops, and debris control devices can be used to help keep the water level at its proper level. When performing any type of Sump Pump Repair, including a check valve and debris control device, a licensed professional should always be contacted, as any mistakes could lead to serious flooding or electrocution.
Although your primary concern during any type of Sump Pump Repair may be the safety of your property and possessions, the overall performance of your system is important. Poor maintenance can result in numerous problems, such as backup failure, electrocution, and damage to walls and ceilings. If a malfunctioning pump may also pose a danger to the general public, it is absolutely crucial to address the issue before it becomes too late. A professional, licensed contractor can ensure that your drainage system is functioning properly and that no further damage will occur.